Supporto

Supporto

Firmware:AXS-A512S48 V2.10 and V3.10

accidentally try to install the wrong firmware or use an older version of the software, it will not succeed and no damage will be caused. Please don’t worry about it and check if the latest software (AXSM Drive Utility

Firmware:AXS-A1TS48 V4.10

accidentally try to install the wrong firmware or use an older version of the software, it will not succeed and no damage will be caused. Please don’t worry about it and check if the latest software (AXSM Drive Utility

Firmware: AXS-A512S48 V2.03 and 3.03

accidentally try to install the wrong firmware or use an older version of the software, it will not succeed and no damage will be caused. Please don’t worry about it and check if the latest software (AXSM Drive Utility

Firmware: AXS-A1TS48 V2.03 and 4.03

accidentally try to install the wrong firmware or use an older version of the software, it will not succeed and no damage will be caused. Please don’t worry about it and check if the latest software (AXSM Drive Utility

Software:SRG-A40/SRG-A12 V3.01

Composition Presets can now be accessed using the ASSIGN button on the infrared remote control. A license is no longer required to use NDI HX. ◆ Issues Improved in Version 3.01 Security has been enhanced. System stability

Software: SR-V10 : SR Viewer (Win + Mac)

(Serial No. 12xxx) with s/w V3.20 or higher AND fitted with an HKSR-5804 Network Interface Board with s/w V3.10 or higher. This s/w is also compatible with SRW-5800 (Serial No. 10xxx) and SRW-5800/1 (Serial No. 11xxx)

Software: HDW-F900R : AT V1.38 + FP V1.03 + SS V1.07

correctly and no longer switches to 1/40 or 1/2000 when: – The RM is connected, and RM COMMON MEMORY is OFF. – ECS or SLS is set to ON. – Camcorder power is turned OFF and ON. 5.) Shutter mode no longer switches